The Eigth Week

24th May 2010,

- install part lift on ARIRI

* part lift is the component that lift the disk to the correct position to be scanned.

- assemble conveyor for ARIRI

* conveyor is the part where datum is placed and the hardisk went through to be process according to the type of the machine.

- wiring sensors cylinder for ARIRI.

- wiring WAP

- used rimer to large the hole for dowel pin to fit in.

25th May 2010,

- wiring WAP terminal block with sensor cylinder.

- drill WAP component part.

- install din rail on WAP.

- install tube for another WAP machine.

- wiring the relay for WAP.

26th May 2010,

- prepare wire and wiring WAP.

- prepare tube for 4 WAP machine.

* cut green and yellow colour tube for extend and retract.

* prepare label for the tube according to the nest which is zone 5 and zone 4.

* make sure the tube was cut long enough to connect it with device net.

- wiring CPU's ARIRI.

27th May 2010,

- used rimer to rim WAP component part.

- install tube for WAP machine.

* yellow for retract and green for extend.

* tube need to control the movement of the cylinder.

- wiring terminal block for 4 WAP machine.

28th May 2010,

- wiring datum for ARIRI.

* datum for ARIRI consist of ring light, spotlight, prism glass, camera and laser detector.

* install spotlight on datum ARIRI.

* install ring light on datum wire it.

- install crowder bias on datum.