The Sixth Week

10th May 2010,

- tidy up wire for Leak Tester machine.

- install fitting for Leak Tester cylinder.

* fitting is like a socket to put in the tube.

* there are many type of fitting, some of them are:

~ Y fitting

~ L fitting

~ Straight fitting

- used rimer to larger the hole to put in dowel pin for WAP machine.

- change the main wire connected to portable safety outlet.

11th May 2010,

- install tube for Seal machine.

* put in the tube in the fitting for air to flow through.

- solder diods to solenoid for WAP.

* solder need tin to connect the wire with diods.

- assemble Seal component part.

12th May 2010,

- continue assembling Seal component part.

- tidy up wire for another WAP machine.

- install ionizer controller for WAP machine.

13th May 2010,

- solder doids with tho solenoid again for WAP machine.

- wiring and labeling for WAP machine.

* wiring the sensors from cylinders that just assemble to the machine.

* wiring relay with input output terminal block.

* wiring power supply to the relay.

* labeling mean put the address to the wire according to the input output terminal.

14th May 2010,

- solder wire to pogo block for WAP machine.

* four core wire need to be solder correctly according to the diagram.

* it is soldered to coppers that is slot in the pogo block.

- assemble component part for WAP nest.

* nest for WAP machine function as the holder for the hardisk before it is whack.